audioheritage.org What-is-Aquaplas
11-03-2009, 09:40 PM #3
aquaplas
From the top of my head, without searching for any old posts I participated in....which is where all answers lay.
Aquaplas is an acoustic treatment for JBL speaker cones. I guess I see it's main function in improving the tonal
qualities of the cone; while damping resonance. While others will speak to the
acoustic function more authoritatively; I can speak to the composition > since part of my career as an industrial
chemist was spent designing pigments and applied coatings of one type or
another.
Aquaplas is made essentially with silica and clay; more than likely with some type of bulking agent. It may also
contain a set of secondary pigments to aid in the bulking structure. No doubt the
clay(s) used might be to give both structure and rheological characteristics, allowing the proper viscosity for the
fluid to allow spray application.
It would also have a binder (of which I never tried to analyze), some surfactants in it for wetting; and to maintain
suspension of the clays/minerals; as well as an anti-settling agent.
It is available as a thickened paste. (What I always referred to as "bag bottom paste viscosity" > since it is
trowel-able. I got the sample from Blanchford Chemical (sp?). However, the
materials available to the user are very thick. I'm sure JBL's version is covered under an NDA, and hence is not
available; unless you took the thickened suspension and cut it to get the correct
rheological characteristics to spray.
Too bad in doing that you mess up the pigment volume concentration and the way it consolidates. Then again,
JBL and their supplier already knew that.
Larry
google oversat
aquaplas
Fra toppen af mit hoved, uden at lede efter nogen gamle indlæg, jeg har deltaget i. ... som er hvor alle svar lå.
Aquaplas er en akustisk behandling for JBL højttalerkegler. Jeg tror, jeg ser det vigtigste funktion i at forbedre de
tonale kvaliteter keglen, mens dæmpning resonans. Mens andre vil tale med
akustisk funktion mere autoritativt, jeg kan tale til sammensætningen> da en del af min karriere som en industriel
kemiker blev brugt designe pigmenter og anvendte belægninger af en type eller
anden.
Aquaplas fremstilles i det væsentlige med silica og ler, højst sandsynligt med en form for fyldstof. Det kan også
indeholde et sæt af sekundære pigmenter til at støtte i det fyldegivende struktur. Ingen tvivl om det
ler (r) kunne være at give både struktur og rheologiske egenskaber, med den rette viskositet til væsken for at
tillade påføring.
Det ville også have et bindemiddel (som jeg aldrig prøvet at analysere), nogle overfladeaktive stoffer i det for
befugtning, og at opretholde suspensionen af ler / mineraler, samt en anti-indløser.
Det fås som et fortykket pasta. (Hvad jeg altid benævnt "posebunden pasta viskositet"> da det er murske-stand.
Jeg fik prøven fra Blanchford Chemical (sp?). Men
materialer til rådighed for brugeren er meget tykke. Jeg er sikker på JBL version er dækket under en NDA, og
derfor ikke er tilgængelig, medmindre du tog den fortykkede suspension og klippe det til at få den rigtige
rheologiske egenskaber til at sprøjte.
Ærgerligt i at gøre det du rodet op pigmentvolumenkoncentration og den måde, den konsoliderer. Så igen, JBL og
deres leverandør allerede vidste det.
Larry
audioheritage.org AQUAPLAS
__________________
vh Hans Lund
diyaudio.dk Blog
G+